LT -80℃～-20℃

Product Description
System Introduce
Knowledge Center

Model		LT-8018N	LT-8030N	LT-8062N	LT-8090N	LT-80A1N	LT-80A2WN
Medium Temperature Range		-75℃～-20℃		-80℃～-20℃
Temp. Control and Dispaly		ASET multifunctional controller, control outlet temperature of water tank
Temp. Control Optional		Temperature feedback PT100 (inlet temperature, outlet temperature)
Cooling Capacity	-40℃	0.6KW	1.4KW	2.8KW	3.4KW	4.8KW	7.2KW
	-60℃	0.4KW	0.8KW	1.6KW	2.1KW	4KW	6KW
	-75℃	0.2KW	0.5KW	0.9KW	1.2KW	2KW	3KW
Circulation Pump Flow Rate, Pressure (max)		20L/min 0.7BAR	20L/min 0.7BAR	35L/min 1BAR	35L/min 1BAR	75L/min 1BAR	75L/min 1BAR

Capacity of Liquid Storage		15L	20L	30L	35L	40L	60L
Compressor		Tecumseh, Dorin
Evaporator		Plate Heat Exchanger
Operation Panel		7-inch color touch screen shows setting temperature and measuring temperature, temperature curve record, data export excel-format
Safety Protection		Self-diagnosis function; freezer overload protection; high pressure switch;overload relay, thermal protection device etc. security protection function.
Refrigerant		R-404A/R23 mixed refrigerant
Connection Size		G1/2	G1/2	G3/4	G3/4	G1	G1
Product size(air-cooled)（cm)		5085130	5085175	5595175	70100175	70100175	80120185
Weight (air-cooled)		185kg	230kg	275kg	340kg	380kg	470kg
Power 50HZ max		AC220V 3kW	AC380V 4kW	AC380V 5.5kW	AC380V 7kW	AC380V 8.7kW	AC380V 11.5kW

Shell Material		Cold rolled steel painting
Optional		Circulation pump 35L/min 2.5bar、50L/min 2.5bar、110L/min 2.5bar optional
Optional		Pressure ≤6 bar circulating pump
Optional		MODBUS RTU Protocol, RS 485 Interface
Optional		SUS304 Material
Optional Power		220V 60HZ three-phases，440-480V 60HZ three-phases
Remark		Can make the bigger capacity of liquid storage as required.

Product Applitions

1. The temperature of heat transfer fluid can be adjustable;
2. Adopt ASPERA,DANFOSS,MANEUROP,COPELAND etc. Brand compressor.Stable performance and can work continuously;
3. Use hot gas bypass, save energy and improve the control precision;
4. A variety of fault alarm (overtemperature alarm, high-pressure alarm, sensor alarm, compressor overheat alarm);
5. Power on delay protection;All parts are safety grounding.

How is a low temperature chiller suitable for the mold industry?

Everyone knows that the use of low temperature chillers is relatively extensive, especially in the mold industry.

When the low temperature chiller is used to cool the mold, the mold is generally cooled together with the injection molding machine. Generally speaking, the mold is equivalent to a heat exchanger, and the heat is transferred from the mold to the mold and then from the mold to the cooling medium for cooling. Everyone knows that mold molding is inseparable from the function of cooling. When choosing a low-temperature chiller, try to choose a low-temperature chiller with better quality and higher cost. The relative operating power is higher than that of ordinary ones. If the low temperature chiller is used, it can increase the certain output and achieve a certain profit in a long time.

In the practical application of low temperature chillers and molds, the temperature difference of ice water at the inlet is determined according to the product requirements. In many cases, the temperature difference is 3-5 degrees, which is more ideal. The smaller the temperature difference, the more The same amount of ice water required for the same heat to take away, on the contrary, the required flow is very small.

In addition, when using a low-temperature chiller, it is necessary to continuously check the water quality of the low-temperature chiller. Once the water quality changes for a long time, it will cause some corrosion. If it is not treated in time, it will produce scale and can produce a certain separation. Heat, when severe, will reduce the effect of the conversion. Therefore, when configuring a low-temperature chiller, the water quality must be selected well. In addition, the scale can be treated regularly or in a timely manner.

In the process of cooling with a low-temperature chiller, the pressure of ice water should be selected. Of course, our microcomputer function can meet everyone's requirements and is quite convenient.

Another point is that the pipeline of the low-temperature chiller must be insulated and insulated, otherwise it will cause the loss of cooling capacity, forming dew condensation water on the outer wall, affecting the use of low-temperature chillers.

In fact, when purchasing low-temperature chillers, the more important thing is the quality problem. Since ancient times, it has been a price, since you bought it, you can buy it a little better!

LT -80℃～-20℃

How is a low temperature chiller suitable for the mold industry?

SLJ -110℃～-150℃

Single Fluid Heat Transfer System SR

Reactor Temperature System ZLF