Vehicle Test Chillers

Temperature simulation for vehicle quality test: battery life test, fuel injector/motor test bench, airbag test, component test bench, etc. It can simulate the external environmental conditions in the climate chamber or replace the internal system, which can create the necessary actual temperature conditions for the test bench.

Test temperature of main test items of vehicle electronics:
IC test conditions for locomotives: -40℃～125℃, wind blowing, sun exposure, high vibration;
Instrument panel operation test test conditions: -40℃～85℃;
Motor controller test conditions: operating test temperature: 40 ℃ ~ 110 ℃;
Satellite positioning (GPS) Test conditions: high temperature operation test temperature: 85℃; low temperature operation test temperature: -40℃;
Compound vibration: -40℃～80℃;
Obviously the best solution is for the test house to have temperature simulation system equipment.

KRY series chillers, the temperature range is -40℃~+100℃, which can be extended to +135℃ according to the actual situation, and the temperature control accuracy is plus or minus 0.5℃. The equipment can control the flow and pressure independently while controlling the temperature, and different customized solutions are required for simultaneous control.
The tested object is attached to a test platform adapter.
The inside of the part was cooled and heated by an aqueous solution of ethylene glycol.
The test component needs to go through a specific temperature profile and record changes in temperature.
Temperature variations typically range from -40 ℃to 100 ℃. (expandable to 150 ℃)
When performing a tolerance test, it usually takes an infinite loop.

Equipped with a powerful circulation pump while ensuring the delivery of highly viscous liquids.
Control the flow output with variable frequency regulation or proportional control valve to achieve high precision control total range 5%~100% adjustment.

Dynamometer With Motor Cooling Device:

In the test of AC and DC motor and power tool, the test equipment such as dynamometer is often used. The dynamometer mainly tests the torque, speed and output power of the motor.

The speed of the dynamometer usually Professional introduction of dynamometer with motor cooling devicennot exceed the maximum speed that can be withstood. If it is used for a long time, it will be burnt out because the heat cannot be dissipated, especially the mechanical wear, which greatly shortens the service life of the dynamometer. Therefore, it is necessary to use a cooling device.

The motor cooling device is disposed on the dynamometer for cooling the motor installed in the dynamometer; the dynamometer includes a base, the motor includes a spindle that is disposed at opposite ends of the base, and the cooling device can effectively cool the motor The bearings at both ends and the rotor make the motor and bearing temperature rise and fall to a lower level, improving the accuracy of the motor test and reducing the damage rate.